| |
FAQ |
|
|
|
|
|
|
Where are Gensets used? |
| |
They are used at any place that
requires electricity. |
|
|
|
|
| |
What does a Genset consist of? |
|
|
A Genset
consists of a diesel engine and an alternator, coupled and mounted on a
common base frame with batteries, fuel tank, control panel and a
silencer. The DG set is mounted inside acoustic encloser for reducing
the noise level. |
|
| |
|
| |
Which types of fuel can be used to run Gensets? |
| |
Gensets commonly run on
high-speed diesel. How ever they can also run on other alternative
fuels. |
|
| |
|
| |
What are the different types of control panels
used in Gensets? |
| |
(1)Manual
control panel – The DG set is started and loaded manually. |
|
| |
(2)Auto Main’s
Failure Panel – In this panel; the main supply is monitored and in case
of supply failure the Genset starts automatically and the load is
transferred to the Genset. When the main supply is restored the load is
transferred to the mains and the DG is shut down |
|
| |
|
| |
Are Acoustic Enclosures required? |
| |
As per CPCB norms (for noise
from DG sets) all DG sets of rated capacity of up to 1000 kVA should be
provided with integral acoustic enclosures at the manufacturing stage
itself. For DG sets above 1000 kVA, the noise is to be controlled either
by providing an acoustic enclosure or by acoustic treatment of room at
the user’s end. |
|
| |
|
| |
Who installs Gensets? |
| |
Tanwar Industries can undertake
installation and commissioning job on turnkey basis or only supervision
job as per customer’s choice. |
|
| |
|
| |
Who does after sales service of Gensets? |
| |
After sales service is provided
by authorised service dealer of our company as well as through other
trained person situated at all major location in the country.
Tanwar Industries Gensets carry
a warranty against defective workmanship and material for a period of 24
months from date of dispatch from our factory or 2500 hrs of operation,
whichever occurs earlier (subject to certain terms and conditions of
respective manufacturer of engine and alternated). |
|
| |
|
| |
What spares need to be stocked? |
| |
We recommend stocking of only
routine maintenance spares such as filters, v belt, and some other minor
items. |
|
| |
|
| |
What is the schedule for maintenance? |
| |
Filters, fuel and lubricating
oil to be replaced every 300 hours of operation/or depending upon the
atmospheric and climatic conditions this period can vary . Daily, weekly
and monthly checks also to be performed. |
|
| |
|
| |
What are the specific ratings of DG Sets? |
| |
(1)Prime Power Rating |
|
| |
Prime power rating corresponds
to ISO Standard power for continuous operation. It is applicable for
supplying electrical power at variable load for an unlimited number of
hours instead of commercially purchased power. A 10% overload capability
is available with this rating. |
| |
(2)Standby Power Rating |
|
| |
Standby Power rating corresponds to ISO Fuel
Stop power. It is applicable for supplying standby electrical power at
variable load in areas with well-established electrical networks, in the
event of power failure. No overload capability is available with this
rating. |
| |
|
